(902) 462-8762

Shipping

We deliver using Canada Post Expedited shipping.

Safe & Secure Payments

We are committed to safety and security of your payments.

Great Selection

We offer a wide selection of products from dozens of Brands.

Wish List 0
  • Your shopping cart is empty!

Latest

ATI - AR-15 TactLite Six Position Mil-Spec Stock with Military Buffer Tube Assembly in Destroyer Gray

Brand: ATI

Model: ATIB.2.40.2214

$111.99CAD
  • Adjustable M4 Style Stock
  • Six Position Military Type III Anodized, 6061 T6 Aluminum Mil-Spec (Military) Buffer Tube
    • Mil-Spec Diameter Tube for Maximum Fit into the Mil-Spec Stock
  • Weighs Only 5.7 Oz
  • TrakLOCK System
    • Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube
    • Provides Smooth Secure Stock Adjustments
    • Eliminates the Need for Secondary Locking Mechanisms
  • No Interference with the Charging Handle
  • No Snag Points
  • Thin Scorpion Recoil Pad
  • Dual Sided QD Attachment Point
  • Slot for Tactical Sling Attachment
  • DuPont® Extreme Temperature Glass Reinforced Polymer
  • Manufactured in the USA
  • Limited Lifetime Warranty

 

Fits Most AR-15 variants. Does Not fit AR-10 or .308 Variants

 

Note:  This stock will accept a Military Buffer Tube

Adjustable M4 Style Stock Six Position Military Type III Anodized, 6061 T6 Aluminum Mil..
$111.99CAD

ATI - AR-15 TactLite Six Position Mil-Spec Stock in Destroyer Gray

Brand: ATI

Model: ATIB.2.40.2212

$49.99CAD

Fits: Most AR-15 variants/Firearms with Military Buffer Tube. (No Buffer Tube is Included with this Stock)

Fits Note: Does Not fit AR-10 or .308 Variants 

  • TactLite Adjustable Rifle Stock
  • M4 Style
  • Weighs Only 5.85 Oz
  • TracLOCK System
    • Provides Smooth Secure Stock Adjustments
    • Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube
    • Locks Down Firm with One Lever - No Need for Secondary Locking Mechanisms
  • No Interference with the Charging Handle
  • No Snag Points
  • X Series Thin Butt-Pad
    • Non-Slip, Removable
    • Upgrade to an X1 or X2 Recoil Reducing Pad! Less Recoil and Greater Length of Pull!
  • Dual Sided QD Attachment Point
  • Slot for Tactical Sling Attachment
  • Weatherproof 
  • DuPont® Extreme Reinforced Polymer
  • Limited Lifetime Warranty
  • Made in the USA
     

Notes - TactLite Stock Upgrades:

The ATI X1 & X2 Recoil Reducing Pads Provide Recoil Reduction & Increase Length of Pull! Part #'s A.5.10.2531 & A.5.10.2530

The TactLite Stock will Accept the ATI TactLite Adjustable Cheekrest Kit to Increase Cheekrest Hight Up to 1 1/4", However the Stock Must Be In the Fully Extended Position to Avoid Charging Handle Interference. Also Great for Use with Side-Charging AR-15's! 

Fits: Most AR-15 variants/Firearms with Military Buffer Tube. (No Buffer Tube is Included with this ..
$49.99CAD

ATI - AK-47 TactLite Elite Adjustable TactLite Stock in Destroyer Gray

Brand: ATI

Model: ATIB.2.40.1265

$69.99CAD

Fits: Most stamped AK receivers, will not fit milled receivers.

Note: *Will not fit the M-70 which has a stamped receiver, but utilizes an alternate system for attaching the stock.

  • Adjustable M4 Style 6-Position Mil-Spec Stock
  • Mil-Spec Diameter for Maximum Fit Onto Mil-Spec Buffer Tubes
  • Positive Locking System
    • Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube
    • Provides Smooth Secure Stock Adjustments
    • Eliminates the Need for Secondary Locking Mechanisms
    • Weighs Only 5.85 Ounces
  • No Snag Points
  • Non-Slip Recoil Pad
  • Dual-Sided QD Attachment Point
  • Slot for Tactical Sling Attachment
  • Receiver Mount & All Mounting Hardware Included
  • Removeable/Adjustable Tactical Cheekrest
    • Elongated Design to Fit All Users
    • Includes Cheekrest with ½” of Vertical Adjustment
  • DuPont® Extreme Reinforced Polymer
  • Limited Lifetime Warranty
  • Manufactured in the USA

SEC922R: ATI products are manufactured in the USA and count towards compliance parts. Contact your local FFL or the ATF for this and other compliance issues. 

Fits: Most stamped AK receivers, will not fit milled receivers.Note: *Will not fit the M-70 whi..
$69.99CAD

ATI - AK-47 Strikeforce Adjutstable Side-Folding TactLite Stock & Handguard Package in Destroyer Gray

Brand: ATI

Model: ATIB.2.40.1250

$139.99CAD

Fits: Most stamped receivers. Will not fit milled receivers.

*Will not fit the O-PAP/N-PAP M-70. (The M-70 has a stamped receiver, but utilizes a different principle of attaching the stock and the gas piston is longer than a standard AK.)

*ATI AK-47 stocks are not compatible with any AK-47 that has an under-folding stock or was originally designed to have an under-folding stock like the NMH-90, etc.

Six-Position Adjustable Side-Folding Strikeforce Stock with Scorpion Recoil System, Ventilated Handguards, Pistol Grip and Adjustable Cheekrest

  • 6-Position Adjustable Side-Folding Stock
  • Can be Fired from Folded Position
    • TracLOCK System
      • Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube
      • Provides Smooth Secure Stock Adjustments
      • Eliminates the Need for Secondary Locking Mechanisms
  • No Snag Points
  • Dual-Sided QD Attachment Point
  • Scorpion Recoil System – Absorbs Recoil Energy
    • Scorpion Razorback Recoil Pad – Non-Slip, Removable
    • Scorpion Recoil Pistol Grip – Ergonomic, Sure-Grip Texture
    • Recoil Impact is Absorbed – Shooting any Load Size can now be Done With No Pain Being Transferred to the Shooter
    • Not Affected by Chemicals
    • Remains Flexible in Extreme Temperatures
    • Removes Limitations from Spring and Piston Type Recoil Suppression Systems
  • Ergonomic, Textured and Ventilated Upper and Lower Handguards
  • 4 Picatinny Rails
    • One 4” Picatinny Rail
    • Two 2” Picatinny Rails
    • One 2” Picatinny Rail with Swivel Stud
  • Blank Inserts for when Rails are not in use
    • Removable/Adjustable Tactical Cheekrest
      • Elongated Design to Fit All Users
      • Includes Short Cheekrest with ½” of Adjustment
  • Slot for Tactical Sling Attachment
  • 3 Sling Swivel Studs
  • Includes Steel T-Nut and Bolt
  • DuPont®Extreme Temperature Glass Reinforced Polymer
    • Manufactured in the USA
    • Limited Lifetime Warranty

Side Folding Stock Note: Your firearm must meet SEC 922R requirements to retain the adjustable buttstock in the folding buttstock configuration. If your firearm does not meet the SEC 922R requirements, you must equip the firearm with a fixed position and non-folding buttstock.

SEC 922R: Stocks, handguards and pistol grips are Manufactured in the USA and count towards compliance parts. Contact your local gun shops or shooting ranges for this and other compliance issues.

Warning!!! - Do Not Over Tighten Screws
Stripped Holes and Broken Screw Heads are NOT Covered Under the Warranty 

Fits: Most stamped receivers. Will not fit milled receivers.*Will not fit the O-PAP/N-PAP M-70. (The..
$139.99CAD

ATI - SKS Strikeforce Adjustable Side-Folding TactLite Stock in Destroyer Gray

Brand: ATI

Model: ATIB.2.40.1232

$129.99CAD

Fits: Most SKS Rifles

  • Six Position Adjustable Side-Folding Stock
  • Can be Fired from Folded Position
  • TracLOCK System
    • Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube
    • Provides Smooth Secure Stock Adjustments
    • Eliminates the Need for Secondary Locking Mechanisms
  • No Snag Points
  • Dual Sided QD Attachment Point
  • Scorpion Recoil System
    • Scorpion Razorback Recoil Pad 
    • Non-Slip, Removable
    • Scorpion Recoil Pistol Grip
    • Sure-Grip Texture
    • Recoil Impact is Absorbed 
    • Shooting any Load Size can now be Done with No Pain being Transferred to the Shooter
    • Reduces the Challenge to Reacquire the Target by Minimizing the Muzzle Lift
    • Not Affected by Chemicals
    • Remains Flexible in Extreme Temperatures
    • Eliminates the Felt Punch of the Recoil
    • Removes Limitations from Spring and Piston Type Recoil Suppression Systems
  • One 4” Picatinny Rail
  • Three 2” Picatinny Rails
  • One 2” Swivel Stud Picatinny Rail
  • Blank Covers for When Rails are Not in Use
  • Additional Ventilation in Forend and Top Cover
  • Removable/Adjustable Cheekrest System
    • Elongated Design to Fit All Users
    • Includes Short Cheekrest with ½” of Adjustment
  • Slot for Tactical Sling Attachment
  • Two Sling Swivel Studs
  • Mounting Hardware Included
  • DuPont® Extreme Temperature Glass Reinforced Polymer
  • Manufactured in the USA
  • Limited Lifetime Warranty

 

Note: Sling Swivel Studs Accepts ATI's Sling Swivel (Part # A.5.10.2506) or any Standard Sling Swivel

*Some Minor Modification may be Required. Blade Bayonet must be removed for installation of ATI Stock

**Six Degree Drop Tube Adapter Sold Separately for Use with Iron Sights 

SKS Scope Mount Also Sold Separately.

SEC922R: ATI products are manufactured in the USA and count towards compliance parts. Contact your local gun shops or shooting ranges for this and other compliance issues.

Fits: Most SKS RiflesSix Position Adjustable Side-Folding StockCan be Fired from Folded Positio..
$129.99CAD

ATI - AK-47 Strikeforce Adjustable Side-Folding TactLite Stock in Destroyer Gray

Brand: ATI

Model: ATIB.2.40.1226

$89.99CAD

Fits: Most stamped AK-47 receivers. Will not fit milled receivers.

Note: *Will not fit the M-70. (The M-70 has a stamped receiver, but utilizes a different principle of attaching the stock and the gas piston is longer than a standard AK.)

  • Six Position Adjustable/Side Folding Stock
  • Can be Fired from Folded Position
  • TracLOCK System
    • Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube
    • Provides Smooth Secure Stock Adjustments
    • Eliminates the Need for Secondary Locking Mechanisms
  • Removable/Adjustable Cheekrest System
    • Elongated Design to Fit All Users
    • Includes Short Cheekrest with ½” of Adjustment
  • No Snag Points
  • Thin Scorpion Recoil Pad
  • Dual Sided QD Attachment Point
  • Slot for Tactical Sling Attachment
  • Mounting Hardware Included
  • DuPont® Extreme Temperature Glass Reinforced Polymer
  • Manufactured in the USA
  • Limited Lifetime Warranty

Note: Sling Swivel Studs Accepts ATI's Sling Swivel (Part # A.5.10.2506) or any Standard Sling Swivel 

Side Folding Stock Note: Your firearm must meet SEC 922R requirements to retain the adjustable buttstock in the folding buttstock configuration. If your firearm does not meet the SEC 922R requirements, you must equip the firearm with a fixed position and non-folding buttstock.

SEC922R: ATI products are manufactured in the USA and count towards compliance parts. Contact your local gun shops or shooting ranges for this and other compliance issues. 

Fits: Most stamped AK-47 receivers. Will not fit milled receivers.Note: *Will not fit the M-70...
$89.99CAD

ATI - Ruger 10/22 Strikeforce Adjustable Side-Folding TactLite Stock in Destroyer Gray

Brand: ATI

Model: ATIB.2.40.1216

$129.99CAD

Fits: Most Ruger® 10/22® Rifles.  Will Not Accommodate Rifles Equipped with Bull Barrels.

  • Six Position Adjustable/Side-Folding Stock
  • Can be Fired from Folded Position
  • TracLOCK System
    • Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube
    • Provides Smooth Secure Stock Adjustments
    • Eliminates the Need for Secondary Locking Mechanisms
  • No Snag Points
  • Thin Scorpion Recoil Pad
  • Dual Sided QD Attachment Point
  • Scorpion Recoil System
    • Scorpion Razorback Recoil Pad 
    • Non-Slip, Removable
    • Scorpion Recoil Pistol Grip
    • Sure-Grip Texture
    • Recoil Impact is Absorbed 
    • Shooting any Load Size can now be Done with No Pain being Transferred to the Shooter
    • Reduces the Challenge to Reacquire the Target by Minimizing the Muzzle Lift
    • Not Affected by Chemicals
    • Remains Flexible in Extreme Temperatures
    • Eliminates the Felt Punch of the Recoil
    • Removes Limitations from Spring and Piston Type Recoil Suppression Systems
  • One 4” Picatinny Rail
  • Three 2” Picatinny Rails
  • One 2” Swivel Stud Picatinny Rail
  • Blank Covers for When Rails are Not in Use
  • Additional Ventilation in Forend and Top Cover
  • Removable/Adjustable Cheekrest System
    • Elongated Design to Fit All Users
    • Includes Short Cheekrest with ½” of Adjustment
  • Slot for Tactical Sling Attachment
  • Two Sling Swivel Studs
  • Mounting Hardware Included
  • DuPont® Extreme Temperature Glass Reinforced Polymer
  • Manufactured in the USA
  • Limited Lifetime Warranty
     

Note: Swivel Studs Accept any Standard Sling Swivel

*Six Degree Drop Tube Adapter Sold Separately for Use with Iron Sights

Fits: Most Ruger® 10/22® Rifles.  Will Not Accommodate Rifles Equipped with Bull Barrels.Six Po..
$129.99CAD

ATI - Ruger Mini-14/Thirty Strikeforce Adjustable Side-Folding TactLite Stock in Destroyer Gray

Brand: ATI

Model: ATIB.2.40.1210

$147.99CAD

Fits: All Ruger® Mini-14® with Serial Number 181 and Above

  • Six Position Adjustable/Side Folding Stock
  • Can be Fired from Folded Position
  • TracLOCK System
    • Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube
    • Provides Smooth Secure Stock Adjustments
    • Eliminates the Need for Secondary Locking Mechanisms
  • No Snag Points
  • Thin Scorpion Recoil Pad
  • Dual Sided QD Attachment Point
  • Scorpion Recoil System
    • Scorpion Razorback Recoil Pad 
    • Non-Slip, Removable
    • Scorpion Recoil Pistol Grip
    • Sure-Grip Texture
    • Recoil Impact is Absorbed 
    • Shooting any Load Size can now be Done with No Pain being Transferred to the Shooter
    • Reduces the Challenge to Reacquire the Target by Minimizing the Muzzle Lift
    • Not Affected by Chemicals
    • Remains Flexible in Extreme Temperatures
    • Eliminates the Felt Punch of the Recoil
    • Removes Limitations from Spring and Piston Type Recoil Suppression Systems
  • One 7" Picatinny Top Rail
  • Two 2" Pictinny Rails
  • One 2" Swivel Stud Picatinny Rail
  • Blank Covers for When Rails are Not in Use
  • Additional Ventilation in Forend and Top Cover
  • Removable/Adjustable Cheekrest System
    • Elongated Design to Fit All Users
    • Includes Short Cheekrest with ½” of Adjustment
  • Slot for Tactical Sling Attachment
  • Two Sling Swivel Studs
  • Mounting Hardware Included
  • DuPont® Extreme Temperature Glass Reinforced Polymer
  • Manufactured in the USA
  • Limited Lifetime Warranty

 

Note: Sling Swivel Studs Accepts ATI's Sling Swivel (Part # A.5.10.2506) or any Standard Sling Swivel

Fits: All Ruger® Mini-14® with Serial Number 181 and AboveSix Position Adjustable/Side Folding Stock..
$147.99CAD

Bestsellers

SNAFU - 3 Day Patrol Bag - Black - Reg Price $67.99

Brand: SNAFU Gear

Model: SNA-C2100/BK

$25.99CAD $67.99CAD

SNAFU Gear is our new brand.  We are working to create a Canadian Product that will compete with some of the most popular brands in the United Stated.  But with a Canadian Price.  We dare you to compare our product with a similar and I firmly believe you will save a minimum 20% and be totally impressed with the quality.

SNAFU 3 Day Patrol Bag

Compact in design, water resistant and sturdy made from tough 600D material. The SNAFU 3 Day Patrol Bag was built to manage your essential clothing and equipment while on the move. A versatile Two Main 600D polyester Waterproof bag compartment with frameless backpack.    

It has a reinforced grab strap with two padded shoulder straps.   

Specifications:

Made from tough 600D Nylon

Padded Shoulder Strap

Padded Divider for Lap Top Carriage

Top Opening

Cell Phone Pocket

Molle Compatible

Padded Internal Diver

Waterproof Zipper

Canadian Flag Embroidered on front of bag

SNAFU Gear is our new brand.  We are working to create a Canadian Product that will compete ..
$25.99CAD $67.99CAD

Tapco - MAG6605BK - 5rd Detachable SKS Magazine - Black

Brand: Tapco

Model: TAP-16666

$37.99CAD

We’ve designed our SKS Detachable Magazines with serious shooters in mind. The mag body, made of high strength composite, has horizontal grooves cut into it for an enhanced gripping surface. We’ve used the highest quality interior components and incorporated a metal floorplate so you can expect maximum strength from this magazine. That, plus the fact that this mag is made in the U.S.A. so it counts for three compliance parts, you could say we’ve really thought of everything. Counts as 3 U.S. 922r Compliant Parts.

 *Can be used in factory wooden stocks by filing the inside of the magazine well on the wooden stock, in order to accommodate the wider polymer magazine. 

We’ve designed our SKS Detachable Magazines with serious shooters in mind. The mag body..
$37.99CAD

Tapco - SKS6632BK - SKS Gas Tube - Standard

Brand: Tapco

Model: TAP-16687

$84.99CAD

 

Tapco SKS Gas Tube - Standard

A properly designed gas system is essential to the functionality of your SKS rifle. This improved gas tube is precision machined from steel, making it a crucial upgrade to your aging weapon. The handguard on the INTRAFUSE® SKS Gas Tube is the same one found on the INTRAFUSE® SKS Stock System and provides a Picatinny rail on top of your SKS, making a solid mounting platform for optics.

  Tapco SKS Gas Tube - Standard A properly designed gas system is essential to the f..
$84.99CAD

TAPCO - Extended Magazine Release SKS Plastic Black

Brand: Tapco

Model: TAP-16665

$9.50CAD

Product Information

This extended mag release works with original fixed or detachable rings and fits Chinese, Russian and Romanian SKS rifle magazines. It will not fit the AK converted SKS rifles, Yugo or Slovinian versions. Comes with a lifetime factory warranty. Made in the USA.

Technical Information

Notes:

  • Works with original fixed or detachable magazines
  • Fits Chinese, Russian or Romanian SKS rifle mags 
  • Extended mag catch will not fit the AK converted SKS rifles or Yugo 
  • Manufacturer's lifetime warranty 

 

Product Information This extended mag release works with original fixed or detachable rings a..
$9.50CAD

Mec-Gar - CZ 75B, 85B, SP-01, Shadow - 9mm - 10 Limited - Blue

Brand: MEC-GAR

Model: MGCZ7510B

$43.00CAD

Mec-gar - CZ 75B, 85B, SP-01, Shadow - 10 Limited - Blue

Mec-gar - CZ 75B, 85B, SP-01, Shadow - 10 Limited - Blue ..
$43.00CAD

Mec-Gar - PARA-USA P16 40 S&W - Nickel

Brand: MEC-GAR

Model: MGP164010N

$47.00CAD
  • Carbon Steel Tube, heat-treated for strength
  • Higher tensile music wire spring
  • Polymer follower
  • Removable steel butt-plate
Carbon Steel Tube, heat-treated for strength Higher tensile music wire spring Pol..
$47.00CAD

Tapco - STK90161 T6 Rubber Buttpad - Black

Brand: Tapco

Model: TAP-16607

$21.99CAD

 

Tapco T6/M4 Rubber Buttpad

Easily installed on any T6 or M4 style collapsible stock, this rubber buttpad reduces the weapon's felt recoil while positioning the stock to the shoulder for better controllability. Added texturing ensures a proper stock weld to the shoulder. Marked "TAPCO USA".

  Tapco T6/M4 Rubber Buttpad Easily installed on any T6 or M4 style collapsible stoc..
$21.99CAD

SNAFU - 3 Day Patrol Bag - Olive Drab - Reg Price $64.99

Brand: SNAFU Gear

Model: SNA-C2100/OD

$64.99CAD

SNAFU Gear is our new brand.  We are working to create a Canadian Product that will compete with some of the most popular brands in the United Stated.  But with a Canadian Price.  We dare you to compare our product with a similar and I firmly believe you will save a minimum 20% and be totally impressed with the quality.

SNAFU 3 Day Patrol Bag

Compact in design, water resistant and sturdy made from tough 600D material. The SNAFU 3 Day Patrol Bag was built to manage your essential clothing and equipment while on the move. A versatile Two Main 600D polyester Waterproof bag compartment with frameless backpack.    

It has a reinforced grab strap with two padded shoulder straps.   

Specifications:

Made from tough 600D Nylon

Padded Shoulder Strap

Padded Divider for Lap Top Carriage

Top Opening

Cell Phone Pocket

Molle Compatible

Padded Internal Diver

Waterproof Zipper

Canadian Flag Embroidered on front of bag

SNAFU Gear is our new brand.  We are working to create a Canadian Product that will compete ..
$64.99CAD